hs072 series assemblies ? 65 amp ac output @ 40c ? single channel output ? 3 to 32 vdc input control voltage ? panel mounted ? ul, csa, vde, ce approved ssrs product selection description 65 a 65 a 3-32 vdc control HS072-D2490 hs072-hd6090 output specifications (1) description HS072-D2490 hs072-hd6090 operating voltage (47-63hz) [vrms] 24-280 48-660 transient overvoltage [vpk] 600 1200 maximum off-state leakage current @ rated voltage [marms] 10 5 minimum off-state dv/dt @ maximum rated voltage [v/sec] (2) 500 500 maximum load current [arms] 65 65 minimum load current [arms] 0.04 0.04 maximum surge current (16.6ms) [apk] 1200 1200 maximum on-state voltage drop @ rated current [vpk] 1.6 1.7 maximum i2t for fusing (8.3 msec) [a2 sec] 6000 6000 minimum power factor (with maximum load) 0.5 0.5 input specifications (1) description HS072-D2490 hs072-hd6090 control voltage range 3-32 vdc 3-32 vdc minimum turn-on voltage 3.0 vdc 3.0 vdc minimum turn-off voltage 1.0 vdc 1.0 vdc maximum reverse voltage 32 vdc 32 vdc typical input current 3.4 ma @ 5 vdc 2.0 ma (3) nominal input impeadance 1500 ohms see note 3 maximum turn-on time [msec] 1/2 cycle 1/2 cycle maximum turn-off time [msec] 1/2 cycle 1/2 cycle general specifications description parameters dielectric strength, input/output/base (50/60hz) 4000 vrms minimum insulation resistance (@ 500 v dc) 10 9 ohm maximum capacitance, input/output 8 pf ambient operating temperature range -40 to 80c ambient storage temperature range -40 to 125c status indicator display none weight (typical) 1.35 lb (612g) encapsulation themally conductive epoxy recommended terminal screw torque range: 6-32 screws - 10 in/lbs. 8-32 screws - 20 in/lbs. (screws dry without grease) thermal pad installed yes general notes 1) all p ara meters at 25 c u nl ess othe rwise speci fi ed. 2) off-sta te dv/dt te st m etho d pe r eia/nar m stan da rd rs-4 43 , p ar agrap h 13 .11.1 3) in pu t circu itry for dc con trol ve rsio n in corp ora tes active cu rre nt limi te r (hd mo del o nl y)
mechanical specifications thermal derate information agency approvals a gency approvals are for relay only. ul e116949 (d2490) ul e116950 (hd6090) csa lr81689 (all) vde 10143 ug (d2490, hd6090) rev. 111810
annex - enviromental information
|